|
 |
|
Production |
|
|
|
 |
Russia, 129626, Moscow, 3-rd Mytischinskaya street, 16, POB.91
telephone/fax
(495)787-5352/787-1456
e-mail: mail@topazlab.ru
|
| |
|
|
 |
Modules of airborne recorder’s (BUR) information |
| |
The results of flight data processing are displayed to the operator in
the following formats:
- proximate analysis form;
- table;
- graph;
- dashboard;
- 3-D aircraft attitude model;
- flight trajectory.
Proximate analysis module makes it possible to
draw a conclusion on the technical condition of the aircraft, its systems and
units, and also on flight crew actions during intervals between flights,
following the algorithms from the Message Catalogues compiled by the aircraft
designers. In order to acknowledge the events, revealed during the proximate
analysis, "ÑÊÀÒ" software allows for the reference information in the form of
parameter graphs and "Reference-mode. Proximate analysis module provides
processing of flight data recorded by more than one flight data recorders (BUR)
involving unified database of the designed parameters.
|
Table provides a means for carrying out an
accurate quantitative analysis of data and saving the results in various formats:
- in the form of the physical value of the assigned format or code;
- in a prescribed colour;
- in vertical or horizontal direction;
- with data decimation.
detailed>>
Results of flight data processing can
be formed in accordance with the parameters of the current or standard (formed
earlier) task with corresponding output attributes.
|
Graph provides a means for detailed review,
analysis, and documenting with data output:
- in a prescribed colour;
- by means of dots or lines;
- with markers or without markers;
- with parameter labels or without parameter labels;
- with arbitrary text in the graph field.
While examining data processing results in the form of graphs it is
possible to use the following operations:
- ranging;
- displacement of active parameter graph;
- dimensional scaling of active parameter display;
- replacement of active parameter;
- parameters attributes alteration;
- graphs diversity.
Results of flight data processing can be formed in accordance
with the parameters of the current or standard (formed earlier) task with
corresponding output attributes.
|
Dashboard provides a means for display of basic
dashboard set pointer indicators readings. Instrumentation indications
correspond to parameters values from the flight data file.
|
3-D aircraft attitude model provides a means
for representation of the processing results in the form of a dynamic
three-dimensional image of aircraft with the indication of basic flight
parameters (altitude, course, speed, pitch, and roll). Aircraft display image is
formed in accordance with parameters values from the flight information
file.
|
Flight trajectory provides a means for
representation of the processing results in the form of an aircraft movement
trajectory with a possibility to make analysis from different viewing points and
to change the picture scale. Flight trajectory is constructed in accordance with
parameter values from flight information file. It is possible to display several
flight trajectories simultaneously.
While examining data processing results
displayed in the form of flight trajectory it is possible to use the following
operations:
- setting of sighting point and target tracking mode;
- map selection;
- map layers image setup;
- trajectory binding to a point on the map defined by user;
- trajectory origin and end points stitching;
- switching to 3-D aircraft attitude model;
- alteration of processing time gap.
|
The "ÑÊÀÒ" software allows for time synchronization of
the processing results obtained in different types. While examining data processing results displayed in any
form it is possible to browse the data in the following modes:
- in direct and reverse directions;
- in automatic mode-Start/Stop mode;
- in single-step mode;
- beginning from preset point of time.
|
|
|
ðóñ
